Edcor PC Mounted 2H at 150mA DC choke
Power and audio output transformers for "A Mighty Midget" from AudioXpress.
Category
Manufacturer
Item no.
- PM102-8
Product weight
- 4,30 kg
Shipping weight
- 4,40 kg
Description
"A Mighty Midget"
A simple single-ended pentode amp that uses inexpensive compactron TV tubes. It puts out about 3 watts per channel, and uses only one (two-section) tube per channel. For more information and schematic see Pete Millett's DIY Audio pages on the "A Mighty Midget".
Audio Output Transformers
This package has two GXSe10 single ended output transformer. 10W, single ended tube output transformer for 8K Ohms to your choice of 4, 6, 8, or 16 Ohms.
Power Transformer
The XPWR104 power transformer is a 120V, 60Hz. or 240V, 50/60Hz. line to 250V (125-0-125) center tapped at 125mA and 6.3V at 2A.
Chokes
This package has two PXC63-2H-150mA chokes is a 2H, 150mA printed circuit board mounted inductor.
Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.
The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.
The Bobbin
EDCOR's royal blue bobbin with black finishing tape.
Termination
The terminations are UL1015, 18 ga. lead wire for the XPWR104 and UL1015, 20 ga. lead wire for the GXSE10. The PXC63-2H-150mA is designed for printed circuit boards. For footprint and suggested hole and pad size please see the dimensional drawing 15000-EI625-087-00P12.
Mounting
This unit comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance.
A simple single-ended pentode amp that uses inexpensive compactron TV tubes. It puts out about 3 watts per channel, and uses only one (two-section) tube per channel. For more information and schematic see Pete Millett's DIY Audio pages on the "A Mighty Midget".
Audio Output Transformers
This package has two GXSe10 single ended output transformer. 10W, single ended tube output transformer for 8K Ohms to your choice of 4, 6, 8, or 16 Ohms.
Power Transformer
The XPWR104 power transformer is a 120V, 60Hz. or 240V, 50/60Hz. line to 250V (125-0-125) center tapped at 125mA and 6.3V at 2A.
Chokes
This package has two PXC63-2H-150mA chokes is a 2H, 150mA printed circuit board mounted inductor.
Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.
The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.
The Bobbin
EDCOR's royal blue bobbin with black finishing tape.
Termination
The terminations are UL1015, 18 ga. lead wire for the XPWR104 and UL1015, 20 ga. lead wire for the GXSE10. The PXC63-2H-150mA is designed for printed circuit boards. For footprint and suggested hole and pad size please see the dimensional drawing 15000-EI625-087-00P12.
Mounting
This unit comes with steel end bells for mounting with the use of four screws. The end bells are powder coated Gentian Blue (RAL 5010) to add to your tube display and overall appearance.
.jpg)
.png)
.jpg)
