Edcor EI50 12" strand of EI50, M-6, 29 Gauge - 0.014" (0.355mm) line grain oriented silicon steel lamination.
Edcor B050-063-00 coil bobbin, designed for EI50, 0.50" x 0.625" window
Interesting items
Description
These Bobbins are Nylon 6/6 glass filled bobbins designed for EI50 laminated core, with a window 0.50" x 0.625".
Nylon 6/6 Glass Filled
Nylon 6/6 is very easy to modify with fillers, fibers, internal lubricants, and impact modifiers. Glass Filled nylon Variants of this nylon exhibit increased structural and impact strength, and rigidity. The addition of glass fibers to nylon 6/6 increases tensile strength, stiffness, compressive strength, and a lower thermal expansion coefficient over conventional unfilled grades. Glass filled nylons offer better strength than general purpose nylon.| Core Size | EI50 (0.5" x 0.625") |
| Bobbin Material | Nylon 6/6 GF-30 |
| Tensile strength | 27000psi |
| Tensile Elongation @Break | 3% |
| Flexural Strength | 38000psi |
| Compressive strength | 42000psi |
| Heat distortion, 264psi | 480°F |
| Heat distortion, 66psi | 500°F |
| Volume Resistivity, 50% RH | 10000000000M Ohms-cm |
| Dielectric constant, 100Hz./1KHz. | 4.5/25 |
| Dielectric Strength, 1/8" thick | 530V/mil |
| Oxygen Index | 24 |
| Arc Resistance | 135 sec. |
| Water Absorption, 24 hrs | 0.7% |
| Flamability Rating | H-B |
| Specific Gravity | 1.38 |
| Hot Wire Ignition | 9 sec, |
| Compliance | RoHS & REACH |
.jpg)
.png)
.jpg)
